C3 HYBRID Price | $36,990
|Superb stainless steel outside kitchen with Thetford 3 burners and sink, flip over bench and massive pantry.|
|Sleeping for four, Queen size and two bunk beds.|
|Mega storage, rear and centre full width lockers, unique chemical toilet storage accessible from inside and out.|
|Dedicated Storage: 1645L. Please note, this does not include on top of or beside the bed or on the floor area.|
|Clam shell lid pops up for spacious and airy internal living. Easy one person opening.|
|Drop down ensuite at rear. Minimal set up and pack down.|
|Swing around 270° awning.|
|Full composite aluminium body for light weight, strength and corrosion resistance.|
|Fully insulated with poly-styrene.|
|Steel chassis for strength, hot dipped galvanised for longevity.|
|Off road suspension designed by Modcon.|
|Alko heavy duty jockey wheel.|
|Ark off road ball coupling.|
|2 x 100 amp/h deep cycle AGM batteries.|
|2 x 120L water tanks.|
|Redarc 1230 12v/240v Battery Management System||$2,900|
|25 amp Victron IP67 240v Charger hard wired||$585|
|15 amp Victron 240v Charger with Anderson plug connect||$285|
|Air Conditioning - Bel Air Houghton 2400 - requires 240v power||$2,500|
|240v Power - 15amp inlet (external), RCD and 2 x dual socket (internal)||$750|
|Evakool 160w folding solar panel with built in regulator||$319|
|Cruismaster DO35 Off Road Coupling||$280|
|Darche Annex Walls (1- $350, 2 - $280)||$630|
|Joolca portable hot water system, includes water and gas outlets beside ensuite||$750|
|Portable Hot water plumbed to kitchen with flick mixer||$740|
|Camec inbuilt gas hot water system hard plumbed to outside shower and kitchen||$1900|
|Evakool TMDZ-80 Travelmate Dual Zone 80L Fridge/Freezer||$1,399|
|Evakool TMDZ-80 Travelmate Dual Zone 80L Fridge/Freezer||$1,549|
|TARE: 1700 kg|
|ATM: 2200 kg|
|Ball Weight: 170kg|
|Width (Body): 2.12m|
|Width (Including Awning): 2.24m|
|Height: 2.335m, With Air Con: 2.435m|
The C3 comes standard with the Darche Eclipse 270° Awning (not including walls) for comprehensive weather protection within minutes
The awning and walls are constructed using a hard-wearing proofed 260gsm poly cotton ripstop canvas. The frame is a Aluminium box extrusion with steel hardware. The transit cover is constructed using laminated 600gsm PVC.
AREA OF SHELTER
The awning alone covers 11.5m2. With walls fitted (optional), the set up covers approx. 20.5m2.
ADDITIONAL POLES INCLUDED
3x pivoting alloy telescopic poles are included and purposely fitted under awning arms for easy access and stowing. Each rafter has a purpose drilled hole for additional supplied spigot poles.
UNIQUE POINT OF DIFFERENCE
The Eclipse 270° Awning hinges from two sides, and also has a class leading larger coverage area as the front span runs along the front of the vehicle.
ADDITIONAL WALL USAGE
With the use of Darche's Telescopic Alloy Poles 90-230cm (sold separately), both front walls (optional) are designed to be used as additional extendable awnings.
It is designed to be a free-stander to aid in set up and pack down only, however we recommend that it is pegged down at all times. It has a large surface area, meaning sudden wind gusts could become hazardous. The Darche Eclipse 270° Awning has been designed for general camping use under normal conditions. Always ensure all guy ropes are anchored correctly. It may be necessary to re-adjust guy ropes and pegs at times to maintain the structural integrity of the awning.
Note: To avoid chances of personal injury and or property damage, Darche highly recommends the Eclipse 270° Awning should NOT be erected during windy conditions. Damage caused by wind and/or adverse weather will not be covered under warranty.
The Eclipse 270° Awning is designed as a simple 1 person set up and pack down. Inclement weather may require the assistance of another person.
Included guy ropes need to be fixed between rafters to create a water run off valley.
2 Year factory warranty.